bilsteinGroup

Product group
Fuel and exhaust system

Finden Sie Ihr febi NKW-Ersatzteil auf febi-parts

Selected products

For a smooth running engine

The fuel system supplies the combustion chamber of the engine with the amount of diesel required for each load area.

After igniting the fuel air mixture in the cylinders, the resulting exhaust and combustion residues are conducted into the exhaust system and fed to the exhaust aftertreatment.

febi bilstein's product range includes a variety of different wear parts for the fuel and exhaust system – of course, in tested OE matching quality. The product range includes fuel pumps, fuel feed pumps, exhaust manifolds, turbochargers, exhaust pressure sensors and exhaust temperature sensors.

febi fuel and exhaust system components

THE ADVANTAGES AT A GLANCE

Efficiency: Long service life with low wear

Elevated driving comfort thanks to the use of perfectly coordinated materials and perfect design

Easy assembly thanks to perfect accuracy of fit

Tested OEM quality: febi bilstein meets or exceeds all certification requirements

"Emergency run" in case of faults

In order to meet the increasingly stringent emission standards, the proper functioning of all components in the fuel and exhaust system is necessary.

The fuel air mixture must be constantly monitored and adjusted. This task is performed by the engine management unit on the basis of signals provided by many sensors such as the speed sensor, differential pressure sensor or needle lift sensor. This is the only way to achieve optimal fuel consumption and compliance with emission limits.

If a fault occurs in the fuel and exhaust system, the engine management unit can go into a so-called emergency run. Then it is only possible to drive into the repair shop with reduced engine power. The fault has to be corrected, so that the vehicle is ready for use again.